Ask an offer!

Subject

Name*
Email*
Phone*
City*
Additional information

Areal Snow Plough

FMG’s areal ploughs have been fully redesigned based on customer needs and test results over many years. FMG’s areal and zoom ploughs are suitable for clearing snow from roads and streets, as well as from yards and terminals. The new design offers excellent snow throwing abilities at speeds as low as 15 – 20 km/h.

FMG has also introduced a new innovation on areal and zoom ploughs. The snow plough shoes can now be replaced with wheels, making it possible to adjust the blade just above the surface of the road and in this way conserve the blade and shoes. This feature is really useful when ploughing in the early winter or on asphalt roads.

Category:

Ask an offer!

Subject

Name*
Email*
Phone*
City*
Additional information

The upper wing on the new series of FMG areal ploughs is angled horizontally forward, which allows the driving wind to clean the wing and helps throw the snow up onto the road bank. In addition, the new vizier on top of upper wing prevents snow from blowing onto the bonnet and windscreen.

The new hydraulic suspension acts like a shock absorber, effectively damping vibration from the road surface. In case of an obstacle, the cylinder piston goes forward together with the accumulator, and the correction back is performed easily with the basic hydraulics.

The standard angle of the blade is 45 degrees, which can be adjusted while driving by moving the suspension cylinder forwards or backwards. The adjustment of the suspension cylinder changes the vertical angle of the wing, thereby changing the snow throwing properties. The sensitivity of the hydraulic suspension can also be adjusted by means of the chock valve.

The wing and supports are sturdy, as is the body of the blade, which has been designed for heavy usage, such as cleaning forest roads. Despite the higher weight, the new ploughs are easy to handle due to a short plough body and a centre of gravity close to the adapter. Due to their optimal blade angle and wing curvature, the new ploughs are also easy to push, which benefits fuel consumption.

Floating the wing is controlled by the floating bar between the wing and the plough body. The wing itself is jointed with three lubricated and locked pins, and there are six plastic bearings for lateral movement. Plastic bearings help reduce wear and efficiently damp the drive noise of the plough. Turning the wing is controlled by two hydraulic cylinders with a diameter 80 mm, which enables stepless turning of 0 to 45 degrees to the right-hand side.

The snow plough is equipped with screw adjusted legs that enable precise height adjustment in 3 mm increments. Both legs are located close to the corners, giving the best possible precision in cleaning. The adjustment ranges of the legs are 300 mm, which is sufficient for all needs and blade types.

FMG’s popular areal snow plough is joined by a zoom model, which is equipped with hydraulically operated extension wings. The working width can be increased or decreased on the run with a maximum extension of 0.5 m. Zoom ploughs are ideal for roads with varying widths of narrow bridges, for example, where bigger models are not practical. Zoom ploughs are easy to operate using the joystick on the tractor’s armrest.

FMG has developed new changeable adapters that can be changed easily with screws. Changing the adapter takes just a couple of minutes, and the required parts are available from FMG dealers or by ordering from the factory with express delivery.

FMG ploughs are manufactured from high-grade steel. Ready-welded parts are washed with a hot pressure washer to clean the surface thoroughly before coating. The paint itself is elastic Normadur, which together with the pre-coating process provides an excellent surface finish.

The new series of FMG snow ploughs is available with an even blade (standard), perforated blade, rubber perforated blade, rubber blade and hard metal blade. LED daytime running lights are available as an option. The ploughs are delivered with all the general fittings according to the customer order.

Technical specifications

ModelWidthHeightWorking widthWeight
AA245303 cm123 cm175-245 cm730 kg
AA275334 cm130 cm195-275 cm770 kg
AA300364 cm138 cm220-305 cm810 kg
AA330 395 cm145 cm240-330 cm850 kg
AA360425 cm152 cm260-365 cm890 kg
AA390456 cm159 cm280-395 cm960 kg
AA420486 cm166 cm305-425 cm1010 kg
AA300Z365 cm138 cm224-360 cm960 kg
AA330Z395 cm145 cm244-385 cm1000 kg
AA360Z427 cm152 cm264-420 cm1150 kg

Tarjouspyyntö tuotteesta Areal Snow Plough

Kysy tarjous tästä tuotteesta

Subject

Nimi*
Sähköposti*
Puhelin*
Paikkakunta*
Haluan tarjouksen
uudesta tuotteestakäytetystä tuotteesta

Lisätietoja